SPRAY PAINTS

Maston spray paints and lacquers are suitable for hobbyists and professionals alike. We offer suitable products for both spraying and brush application. With our easy-to-use spray paints youll create luxurious and impressive surfaces easily and quickly. Most of our spray paints are equipped with a patented adjustable Blue Spray jet nozzle. It is possible to adjust the nozzle for both vertical and horizontal painting. The nozzle is easy to use and provides an even painting result.

RUBBERcomp

RUBBERcomp® is a multi-purpose, air drying specialty rubber coating. It can be easily applied by spraying. It protects coated items against moisture, acids, abrasion, corrosion, and skidding /slipping, and provides a comfortable, controlled grip. RUBBERcomp® remains flexible and stretchy over time, and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Available sizes: spray 400ml, cans: 250ml, 1L, 3L and thinner 450. See more: www.rubbercomp.com VIDEO RUBBERcomp

Limit search

  • Spray RUBBERcomp Black 400ml

    Spray RUBBERcomp Black 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Black matt 400ml

    Spray RUBBERcomp Black matt 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Camo green matt 400ml

    Spray RUBBERcomp Camo green matt 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Gun metal grey 400ml

    Spray RUBBERcomp Gun metal grey 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Neon green 400ml

    Spray RUBBERcomp Neon green 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Neon orange 400ml

    Spray RUBBERcomp Neon orange 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Neon red 400ml

    Spray RUBBERcomp Neon red 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Red 400ml

    Spray RUBBERcomp Red 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Rust effect matt 400ml

    Spray RUBBERcomp Rust effect matt 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Transparent high gloss 400ml

    Spray RUBBERcomp Transparent high gloss 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more